Specifications

5-326
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsplnload
dsplnload
Display Line Load—AXSM, AXSM-E, AXSM-32-T1E1-E
The dsplnload command can help you determine the current percent of utilization and cell count on a
line. Using the parameters provided by dspln, you can determine whether the current load on the line
needs modification or troubleshooting.
Syntax
dsplnload <bay.line> [intvl]
Syntax Description
Related Commands
dsplns, dspln
Attributes
Example
Display the load on line 1.1. The display shows that no cells are traversing this line.
MGX8850.6.AXSME.a > dsplnload 1.1
Line : 1.1
Ingress Egress
Rcv CLP0 Cells : 1000 1000
Rcv CLP1 Cells : 0 0
Valid OAM Cells : 0 0
Err OAM Cells : 0 0
Rcv Valid RM Cells : 0 0
VpiVciErr Cells : 0
Rcv Idle Cells : 103266
Ing Gfc Cells : 0
Discard HecErr Cells : 0
Corrected HecErr Cells : 0
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the highest
numbered line on the back card.
intvl The optional time interval in seconds for which the cell rate will be displayed. The range is
1–5. The default is 1. For example, if 5 seconds is specified, the average cell rate for a 5 second
interval is displayed.
Log: no State: active, standby Privilege: ANYUSER