Specifications

5-324
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsplncnt
dsplncnt
Display Line Counters—AXSM, AXSM-E, AXSM-32-T1E1-E
The dsplncnt command displays the values of the bucket cell counters for the given bucket interval (intvl)
on the given line (bay.line).
Bucket cell counters are collected for various types of cells during a bucket interval (15 minutes) and are
stored in a statistics file that is generated at the end of each bucket interval. The statistics file is then passed
to the Cisco WAN Manager (CWM) and the bucket cell counters are cleared.
The bucket counts for the following types of cells are displayed:
Note Unless ingress is specified, the bucket cell counters apply to both the ingress and egress direction.
• Received CLP0 cells*
• Received CLP1 cells*
• Valid OAM cells
• Invalid OAM cells
• Invalid VPI/VCI/PTI cells *
• Ingress Non-zero Generic Flow Control (GFC) cells*
• Ingress Last unknown Vpi*
• Ingress Last unknown Vci*
• Discarded HEC errors
• Corrected HEC errors
• Discarded Usage Parameter Control (UPC) cells with CLP0*
• Total discarded UPC cells*
• Total non-compliant UPC cells*
An asterisk (*) indicates that the displayed field does not apply to the AXSM-1-2488.
Syntax
dsplncnt <bay.line> <intvl>
Syntax Description
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
Range:
For OC12: 1
For OC3: 1–4
T3, E3: 1–8
intvl The time interval to display (0–96). 0 is the current 15-minute interval. 1 is the most
recent 15-minute interval. 2 is the next most recent 15-minute interval, and so on.
96 is the oldest 15-minute interval.