Specifications

5-322

Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches

Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005

Chapter 5

dsplnbucketcnt

Display Line Bucket Counters—AXSM

The dsplnbucketcnt command displays the current bucket values of the bucket cell counters for the given

line (bay.line).

Bucket cell counters are collected for various types of cells during a bucket interval (15 minutes) and are

stored in a statistics file that is generated at the end of each bucket interval. The statistics file is then passed

to the Cisco WAN Manager (CWM) and the bucket cell counters are cleared.

The bucket counts for the following types of cells are displayed:

Note Unless ingress is specified, the bucket cell counters apply to both the ingress and egress direction.

• Received CLP0 cells

• Received CLP1 cells

• Valid OAM cells

• Invalid OAM cells

• Invalid VPI/VCI/PTI cells

• Ingress Non-zero Generic Flow Control (GFC) cells

• Ingress Last unknown Vpi

• Ingress Last unknown Vci

• Discarded HEC errors

• Corrected HEC errors

• Discarded Usage Parameter Control (UPC) cells with CLP0

• Total discarded UPC cells

• Total non-compliant UPC cells

Syntax

dsplnbucketcnt <bay.line>

Syntax Description

Related Commands

dsplncnt

bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the

highest numbered line on the back card.

Range:

For OC12: 1

For OC3: 1–4

T3, E3: 1–8