Specifications

5-318
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsplnalmcnf
dsplnalmcnf
Display Line Alarm Configuration—AXSM-XG
Displays the current statistical line alarm thresholds on the specified line. To change the statistical line
alarms thresholds, use the cnflnalmcnf command.
Syntax
dsplnalmcnf -<line_type> <bay.line>
Syntax Description
Related Commands
clradjlnalmcnt, cnflnalm, dspadjlnalm, dspadjlnalmcnt, dsplnalm, dsplnalmcnt, dsplnalms
Attributes
Example
Display the current line alarm threshold configuration for the line 1.1.
mM8950_DC.15.AXSMXG.a > dsplnalmcnf -sonetsec 1.1
LineNum: 1.1
Section Stat Alarm Severity: None
15min Threshold 24hr Threshold
Section ESs : 60 600
Section SESs : 3 7
Section SEFSs: 3 7
Section CVs : 75 750
M8950_DC.15.AXSMXG.a >
-<line_type>
<bay.line>
Identifies the line which to you want to configure statistical line alarms thresholds.
Enter the keyword (-line_type) followed by the line number, in the format bay.line.
For example: -sonetsec 1.1
The possible line type keywords are:
• -sonetsec
• -sonetline
Note Use the dsplns command to see the line numbers for all lines on the current
card.
Log: no State: active, standby Privilege: ANYUSER