Specifications

5-317
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dsplnalm
dsplnalm
Display Line Alarm—AXSM-XG
Display the line and statistical alarm state for the specified line.
Syntax
dsplnalm <bay.line>
Syntax Description
Related Commands
clradjlnalmcnt, cnflnalm, dspadjlnalm, dspadjlnalmcnt, dsplnalmcnf, dsplnalmcnt, dsplnalms
Attributes
Example
.Display line and statistical alarm state for line 1.1.
M8950_DC.15.AXSMXG.a > dsplnalm 1.1
Line Number : 1.1
Section Alarm State : Clear
Line Alarm State : Clear
Section Stat Alarm State: Clear
Line Stat Alarm State : Clear
M8950_DC.15.AXSMXG.a >
bay.line Identifies the line whose statistical alarm state you want to display, in the format
bay.line. The is either 1 or 2, the bay is 1 or 2, and the line number is from 1 to the
highest numbered line on the back card.
Note Use the dsplns command to see the line numbers for all lines on the current
card.
Log: no State: active, standby Privilege: ANYUSER