Specifications

1-10
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 1 Introduction
List of Commands by Function
cnfatlaslndiagstat Configure Atlas line diagnostics 5-102
cnfatmln Configure ATM line 5-105
cnfautolndiag Configure auto line diagnostics 5-107
cnfbert Configure BERT 5-108
cnfln Configure line 5-137
cnflnalm Configure line alarm 5-141
delapsln Delete APS line 5-169
dellnloop Delete line loopback 5-177
dnln Down line 5-190
dspadjlnalm Display adjacent alarm 5-194
dspadjlnalmcnt Display adjacent line alarm count 5-195
dspalm Display alarm 5-197
dspalms Display alarms 5-202
dspalmcnt Display alarm count 5-199
dspapsbkplane Display APS backplane 5-205
dspapsln Display APS line 5-206
dspapslns Display APS lines 5-208
dspatlasdiagstatcnf Display Atlas diagnostics statistics configuration 5-212
dspatlaslndiagstat Display Atlas line diagnostics statistics 5-213
dspatmln Display ATM line 5-218
dspautolndiag Display auto line diagnostics 5-219
dspbecnt Display BERT count 5-220
dspbert Display BERT 5-221
dspbertstats Display BERT statistics 5-222
dspegrbucketcnt Display egress bucket count 5-275
dspingbucketcnt Display PING bucket count 5-308
dspln Display line 5-313
dsplnalm Display the line and statistical alarm state 5-317
dsplnalmcnf Display line alarm configuration 5-318
dsplnalmcnt Display line alarm counters 5-319
dsplnalms Display line alarms for all lines 5-321
dsplns Display lines 5-329
dsplnbucketcnt Display line bucket count 5-322
dsplncnt Display line count 5-324
dsplnload Display line load 5-326
dsplnpmbucketcnt Display line performance bucket counters 5-327
Table 1-4 AXSM Command List by Function (continued)
Command Description Page