Specifications

Contents
v
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
AINI Link Configuration Quickstart 3-20
IISP Link Configuration Quickstart 3-22
XLMI Link Configuration Quickstart 3-24
General AXSM Configuration Procedures 3-27
Adding ATM Ports 3-27
Configuring Inverse Multiplexing over ATM 3-33
Creating an IMA Group 3-34
Adding an IMA Link to an IMA Group 3-36
Adding an IMA Port to an IMA Group 3-38
Partitioning Port Resources between Controllers 3-40
Selecting the Port Signaling Protocol 3-44
Assigning Static ATM Addresses to Destination Ports 3-46
Configuring ILMI on a Port 3-47
Configuring ILMI Traps and Signaling 3-48
Configuring ILMI Automatic Configuration 3-49
Configuring ILMI Dynamic Addressing 3-50
Starting ILMI with the Default or Existing Values 3-52
Configuring AXSM Line Clock Sources 3-53
Configuring PNNI Links 3-54
Configuring SPVCs and SPVPs 3-54
Defining a Feeder Port 3-58
Defining Destination Addresses for Static Links 3-60
Configuring Point-to-Multipoint SPVCs and SPVPs 3-61
Obtaining the NSAP for a Party 3-64
CHAPTER 4 AXSM Card Management 4-1
Managing CLI Sessions 4-1
Managing Cards 4-3
Displaying General Card Information 4-3
Displaying Software Version and Status Information 4-4
Managing Card SCTs 4-4
Displaying the SCT Assigned to a Card 4-4
Selecting or Changing a Card SCT 4-5
Displaying Card SCT Settings 4-6
Card SCT General SCT Parameters (dspcdsct gen) 4-7
Card SCT COSB Parameters (dspcdsct cosb) 4-8
Card SCT Virtual Circuit Threshold Parameters (dspcdsct vcThr) 4-8
Card SCT COSB Threshold Parameters (dspcdsct cosThr) 4-9
Managing Port SCTs 4-9