Specifications

5-289
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspimagrp
Attributes
Example
Display the configuration for bay 1, group 1.
MGX8850.10.AXSME.a > dspimagrp 1.1
Group Number : 1.1
NE IMA Version : Version 1.0
Group Symmetry : Symm Operation
Tx Min Num Links : 1
Rx Min Num Links : 1
NE TX Clk Mode : CTC
FE TX Clk Mode : ITC
Tx Frame Len : 128
Rx Frame Len : 128
Group GTSM : Down
NE Group State : CfgAbort-Unsupp-ImaVer
FE Group State : StartUp
Group Failure Status : StartUp FE
Tx Ima Id : 11
Rx Ima Id : 1
Max Cell Rate (c/s) : 8980
Avail Cell Rate (c/s) : 0
Diff Delay Max (msecs) : 220
Diff Delay Max Observed (msecs) : 0
Accumulated Delay (msecs) : 0
Clear Accumulated Delay Status : Not In Progress
GTSM Up Integ time(msecs) : 10
GTSM Dn Integ time(msecs) : 1000
Num Tx Cfg Links : 2
Num Rx Cfg Links : 2
Num Act Tx Links : 0
Num Act Rx Links : 0
Least Delay Link : Unknown
Tx Timing Ref Link : 1.1
Rx Timing Ref Link : Unknown
Group Running Secs : 0
Alpha Val : 2
Beta Val : 2
Gamma Val : 1
Tx OAM Label : 1
Rx OAM Label : 0
Test Pattern Procedure Status : Disabled
Test Link : Unknown
Test Pattern : 255
Stuff Cell Indication (frames) : 1
MGX8850.10.AXSME.a >
Log: no State: active Privilege: ANYUSER