Specifications

5-287
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspimagrp
5
dspimagrp
Display IMA Group—AXSM-32-T1E1-E
Displays the following configuration information for the specified IMA group.
Information Description
IMA group number The number of the IMA group you provide to dspimagrp.
NE IMA version The IMA version at the near end (was specified by addimagrp).
Group symmetry The group symmetry mode adjusted during the group start-up.
Minimum links in TX direction The minimum number of links that must be active on the transmit
side for the IMA group to be operational.
Minimum links in RX direction The minimum number of links that must be active on the receive
side for the IMA group to operational.
NE TX clock mode The transmit clocking mode used by the near-end IMA group.
FE TX clock mode The transmit clocking mode used by the far-end IMA group.
TX Frame length The frame length used by the IMA group in the transmit direction.
RX Frame length The frame length used by the IMA group in the receive direction.
Group GTSM The current state of the IMA group (the GTSM state).
NE group state The state of the near-end IMA group. For example: start-up state.
FE group state The state of the far-end IMA group. For example: start-up state.
Group failure status Could be near end state is unknown, failed, start-up, etc.
TX IMA ID The IMA ID currently in use by the near-end IMA function.
RX IMA ID The IMA ID currently in use by the far-end IMA function.
Max cell rate The maximum number of cells per second for this IMA group.
Avail cell rate The amount of bandwidth in cells per second available to this group.
Differential delay maximum The maximum number of milliseconds of differential delay among
the links that are tolerated on this interface.
Diff delay maximum observed The latest maximum differential delay (in milliseconds) observed
between the links having the least and most link propagation delay,
among the receive links currently configured in the IMA group.
Accumulated delay The accumulated delay for the current IMA group in milliseconds.
GTSM up integration time Integration UP time for alarm integration. Persisting checking time
to enter a failure alarm condition, in case of LIF, LODS, RFI-IMA
fault failure alarms. Units of measure are milliseconds.
GTSM down integration time Integration DOWN time for alarm integration. Persisting clearing
time to exit the LIF, LODS, RFI-IMA failure alarm conditions.
Units of measure are milliseconds.
Number TX configured links The number of transmit links that are configured in this IMA group.
Number RX configured link The number of receive links that are configured in this IMA group.
Number of active TX links The number of transmit links that are active in this IMA group.
Number of actual RX links The number of receive links that are active in this IMA group.