Specifications

5-283
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspilmi
dspilmi
Display ILMI—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Display the configuration for the integrated local management interface (ILMI) on a specific port. The
information in the dspilmi output was configured through the cnfilmi command.
Syntax
dspilmi <ifNum> <partId>
Syntax Description
Related Commands
cnfilmi, dspilmis, dspilmicnt, clrilmicnt
Attributes
Example
M8950_DC.5.AXSM.a > dspilmi 11 1
Configuration :
------------- :
Port : 11 SigVpi : 11
Partition : 1 SigVci : 16
IfIndex : 17111051 S:Keepalive Intvl : 1
SessionId : 1 T:conPoll Intvl : 5
Ilmi Trap : enable K:conPoll InactvFactor : 4
Agent : enable EnFromCtrlr : enable
Poll : enable ModLocalAttr : enable
AddrReg : enable ServReg : disable
AutoCnfg : enable
ILMI Protocol :
---------------
State : Verifying
Last Event : Get Response, Connectivity Verified
IME Type : symmetric
IF Type : PNNI
ifNum The logical interface (or AXSM port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
partId The range for partition identifier is as follows:
• AXSM: 1–5
• AXSM-E, AXSM-XG: 1–20
Log: nolog State: active, standby Privilege: ANYUSER