Specifications

5-278
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspfdrstat
dspfdrstat
Display Feeder Statistics—AXSM, AXSM-E, AXSM-XG
Displays the LMI and node statistics for the feeder on the specified port (ifNum). The interface numbers
of active ports are displayed in the dspports command report.
Note This command is unsupported on a Cisco MGX 8950 switch.
For more detailed information on configuring a feeder, refer to the Cisco MGX 8800/8900 Series
Configuration Guide, Release 5.2.
Syntax
dspfdrstat <ifNum>
Syntax Description
Related Commands
clrfdrstat
Attributes
Example
MGX8850.11.AXSMXG.a > dspfdrstat 126
STATUS REPORT ENQUIRY transmitted : 1
STATUS REPORT ENQUIRY received : 6617
STATUS REPORT transmitted : 6617
STATUS REPORT received : 1
UPDATE STATUS transmitted : 16
UPDATE STATUS received : 11
UPDATE STATUS ACK transmitted : 11
UPDATE STATUS ACK received : 16
Invalid PDU received : 0
Invalid PDU length received : 0
Invalid PDU IEs received : 0
Invalid Transaction Num received : 0
Unknown PDU type received : 0
NODE STATUS enquiry transmitted : 7250
NODE STATUS enquiry received : 5362
NODE STATUS ack transmitted : 5362
NODE STATUS ack received : 7249
NODE STATUS degrade transmitted : 0
NODE STATUS degrade received : 0
ifNum The interface number of the port on which to display the feeder statistics. The
interface numbers of active ports are displayed in the dspports command report.
Log: no State: active, standby Privilege: ANYUSER