Specifications

5-260
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspconload
dspconload
Display Connection Load—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The dspconload command displays the number of ingress and egress cells per second on a connection
(ifNum/vpi/vci). With the statistics provided by dspconload, you can determine whether the current load
on the connection suggests a modification to the connection or possible troubleshooting.
Syntax
dspconload <ifNum> <vpi> <vci> [intvl]
Syntax Description
Related Commands
dspcons, dspcon, dspload
Attributes
Example (AXSM)
Display the load on the connection with a VPI and VCI of 101 and 101, respectively, on logical port 3.
In this case, no traffic currently exists on the connection.
MGX8850.10.AXSM.a > dspconload 3 101 101
Getting the stats. Please wait ...
Ingress Egress
Cell rate (cps) : 0 0
ifNum Logical interface (port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi
The VPI of the connection. The range is 0–4095.
vci The VCI of the connection. The range is 0–65635.
intvl The optional time interval in seconds for which the cell rate will be displayed. The
range is 1–5. The default is 1. For example, if 5 seconds is specified, the average cell
rate for a 5 second interval is displayed.
Log: no State: active, standby Privilege: ANYUSER