Specifications

5-257
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspconhwcnf
Syntax
dspconhwcnf <ifNum> <vpi> <vci>
Loopback to MultiProcessor 0 = Disabled/Absent
1 = Enabled/Present
Drop Loopback 0 = Disabled/Absent
1 = Enabled/Present
SABRE Data
Weighted Fair Queuing 0 = Disabled/Absent
1 = Enabled/Present
VSVD Enabled 0 = Disabled/Absent
1 = Enabled/Present
NRM Number of Resource Management Cells
1
: The ABR service
parameter that controls the maximum number of cells that a source
may send for each forward RM cell. Range: 0–7
TRM Time of Resource Management Cells
1
: The ABR service parameter
that provides the upper limit on the time between forward RM cells.
Range: 0–7
CDF The Cutoff Decrease Factor. The ABR service parameter that
controls the decrease in the Allowed Cell Rate (ACR) associated
with the missing RM cell count, which limits the number of forward
RM cells that may be sent in the absence of received-backward RM
cells. Range: 0–7
RIF Rate Increase Factor: The ABR service parameter that controls the
amount by which the cell transmission rate may increase upon
receipt of an RM cell. Range: 0–15
RDF Rate Decrease Factor: The ABR service parameter that controls the
decrease in the cell transmission rate. Range: 0–15
ADTF Allowed Cell Rate (ACR) Decrease Time Factor: The time allowed
between sending RM cells before the rate is decreased to the Initial
Cell Rate (ICR). Range: 1–1023 milliseconds.
Peak Cell Rate The maximum cell rate.
Minimum Cell Rate The minimum cell rate.
1.Resource Management (RM) cells provide information about the state of the net
work such as bandwidth availability, state of congestion, and impending congestion.
Table 5-18 dspconhwcnf Command Output Display Field Descriptions (continued)
Display Field Description (continued)