Specifications

5-253
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspconalmcnts
dspconalmcnts
Display Connection Alarm Counts—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The dspconalmcnts command lists errored connections on the logical interfaces on the card.
This command lists by alarm cause. The causes are:
• Conditioning
• Ingress alarm
• Egress alarm
• Connection conditioning failure
• Mismatch
• A-bit
Syntax
dspconalmcnts
Syntax Description
No parameters
Related Commands
dspconalms
Attributes
Example
Display the connection alarms by alarm cause.
MGX8850.1.AXSM.a > dspconalmcnts
**************************************************************************
************ CONNECTIONS IN ALARM PER INTERFACE (BY ALM CAUSE)************
**************************************************************************
IF# IfState #Condn #IngAlm #EgrAlm #CCFail #ifFail #mismatch #Abit
-- ------- ------ ------- ------- ------- ------- --------- -----
01 ACTV 00000 00000 00000 00000 00000 00000 00000
02 ACTV 00000 00000 00000 00000 00000 00000 00000
03 ACTV 00000 00000 00000 00000 00000 00000 00000
******************** SUMMARY ALARM COUNT FOR THE CARD *******************
#Condn #IngAlm #EgrAlm #CCFail #ifFail #mismatch #abit
000000 000000 000000 000000 000000 000000 000000
Log: no State: active, standby Privilege: ANYUSER