Specifications

5-250
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspcon
Syntax Description
Related Commands
addcon, dspcons, cnfcon
Attributes
Example
Display connection 1 102 102 on the current AXSM.
MGX8850.3.AXSM.a > dspcon 1 102 102
--------------------------------------------------------------------------
Local : NSAP Address vpi vci
(M) 4700918100000100001A531C2A00000103180100 102 102
Remote : NSAP Address vpi vci
(S) 4700918100000200036B5E30CD00000101180200 102 102
--------------------------------------------------------------------------
Conn. Type : VCC Admn Status : ADMN-UP
Service Type : cbr1 Oper Status : FAIL
Controller : 2 Record # : 0
SlavePersist : YES Cast-type : N/A
--------------------------------------------------------------------------
Local PCR : 50 Remote PCR : 50
Local SCR : N/A Remote SCR : N/A
Local CDV : -1 Remote CDV : -1
Local CTD : -1 Remote CTD : -1
Local MBS : N/A Remote MBS : N/A
Max Cost : -1 Frame discard: DISABLED
Local CDVT : 250000 OAM segment : ENABLED
Local PctUtil : 100 Rmt PctUtil : 100
Priority : 8
Pref Rte Id : N/A Directed route: N/A
--------------------------------------------------------------------------
OAM CC Config : DISABLED Statistics : DISABLED
--------------------------------------------------------------------------
Loopback Type : No Lpbk | Dir: N/A | Status: No Lpbk | RTD: 0us
--------------------------------------------------------------------------
--------------------------------------------------------------------------
Port side Tx : AIS Swth side Tx : normal
Port side Rx : AIS Swth side Rx : AIS
--------------------------------------------------------------------------
I-AIS/RDI E-AIS/RDI CONDITIONED CCFAIL IfFail Mismatch LMI-ABIT
YES YES YES NO NO NO NO
ifNum Logical interface (port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi VPI number. At the UNI, the range is 0–255. At the NNI, the range is 0–4095.
vci VCI number. For a VCC, the range is 1–65535. For a VPC, the VCI is 0.
Log: no State: active Privilege: GROUP1