Specifications

5-247
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspchantests
dspchantests
Display Channel Tests—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The tstdelay or tstconseg commands test the integrity of the path of a connection in the ingress and
egress directions, respectively. After you successfully start a test through tstdelay or tstconseg, the
returned message directs you to use dspchantests or dspcon to see the results. The same test results
presented by dspchantests appears in the dspcon display, but dspchantests shows only the test results.
Syntax
dspchantests <ifNum> <vpi> <vci> [-num <count>]
Syntax Description
Related Commands
tstdelay, tstconseg, dspcon
Attributes
ifNum The logical port number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi The VPI range for the SVC or SPVC is 1–255.
vci The VCI range for a VCC SPVC is 1–65535. For a VPC, the only VCI value for an
SPVC is 0.
-num (Optional) A keyword that indicates an aggregate connection count follows.
Log: no State: active, standby Privilege: ANYUSER