Specifications

5-245
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspchandbgcnt
dspchandbgcnt
Display Channelized Debugging Counters—AXSM
Display all channelized debugging counters for the specified channel on the current AXSM.
Note To enable the channelized debugging feature, enter the cnfchandbg command.
Syntax
dspchandbgcnt <ifNum> <vpi> <vci>
Syntax Description
Related Commands
cnfportdbg, clrportdbgcnt, dspportdbgcnf
Attributes
Example
Display the channelized debugging counters for logical interface (or port) 11, VPI 0, VCI 0 on the
current AXSM.
M8850_NY.1.AXSM.a > dspchandbgcnt 11 0 0
Ingress Egress
Instantaneous Qdepth: 0 0
Arr CLP0 EFCI0 cells: 97 97
Arr CLP0 EFCI1 cells: 0 0
Arr CLP1 EFCI0 cells: 0 0
Arr CLP1 EFCI1 cells: 0 0
Dep CLP0 EFCI0 cells: 97 97
Dep CLP0 EFCI1 cells: 0 0
Dep CLP1 EFCI0 cells: 0 0
Dep CLP1 EFCI1 cells: 0 0
Detailed stats not enabled
M8850_NY.1.AXSM.a >
ifNum Logical interface (or port) number. The range is from 0 through 60.
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is
1–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
Log: no State: active/standby Privilege: SERVICE_GP