Specifications

5-232
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspcdsct
dspcdsct
Display Card SCT—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Displays the contents of a card-level Service Class Template (SCT) file. For information about SCTs,
see the cnfcdsct description. To see the number of the current SCT for the card, use dspcd. The examples
in this description illustrate the contents of SCT number 2 and SCT 3.
Note Currently, the system does not support certain parameters in the service class templates (SCTs), so you
can specify them through addcon, cnfcon, or Cisco WAN Manager.
These parameters are (when applicable) PCR, SCR, and ICR.
Syntax (AXSM)
dspcdsct <bw | gen | cosb | vcThr | cosThr>
Syntax Description (AXSM)
Syntax (AXSM-E, AXSM-XG)
dspcdsct < abr | gen | cosb | vcThr | cosThr | qeCosb | qeVcThr >
Syntax Description (AXSM-E, AXSM-XG)
Related Commands
cnfcdsct, dspsct
bw
gen
cosb
vcThr
cosThr
• bw: bandwidth
• gen: general VC
• cosb: class of service buffer
• vcThr: VC thresholds
• cosThr: COSB thresholds
abr available bit rate parameters
gen Policing and Connection Admission Control (CAC) parameters.
cosb Class of Service Buffer parameters
vcThr Virtual Channel Threshold parameters
cosThr Class of Service Threshold parameters
qeCosb Queueing Engine Class of Service Buffer parameters. The Queuing Engine in the
Application-specific Integrated Circuit (ASIC) is used to program connections. This
option displays the specific parameters programmed into it for a connection.
qeVcThr Queueing Engine Virtual Channel Threshold parameters. The Queuing Engine in the
Application-specific Integrated Circuit (ASIC) is used to program connections. This
option displays the specific parameters programmed into it for a connection.