Specifications

5-228
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspcdcnt
dspcdcnt
Display Card Counters—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Displays the number of cells transferred between the service module and the switching planes.
(Synonyms for switching plane are crossbar, xbar, and switch fabric.) One switch fabric is implemented
in hardware by one ASIC. The dspcdcnt command primarily applies to debugging.
The dspcdcnt command displays the following information:
• Cells transferred between the service module and each of the switch planes within the total array of
switch planes.
• Total cells transferred between the service module and the backplane.
• Cells to and from QE48. (AXSM)
• Cells to and from QE1210. (AXSM-E, AXSM-XG)
• Undefined cells.
• Total number of CLP0 and CLP1 cells that have been discarded.
• Errored, invalid, and unsupported OAM cells.
• Errored RM cells.
• Cells transferred between and individual switch plane and each slot. This information is centered on
the switch fabric itself rather than the card. Each switch fabric can route cells to and from any slot,
so the display includes this information for each switching plane.
Syntax
dspcdcnt
Related Commands
clrcdcnt (on the AXSM), dspxbar, dspdevalms, dspdeverrhist, dspxbarerrthresh
Attributes
Example (AXSM)
Display the cell transfers between the current AXSM and the switch planes (crossbar planes).
MGX8850.11.AXSM.a > dspcdcnt
Ingress cells to xbar Egress cells from xbar
--------------------- ----------------------
plane 1 : 0000000000000000326416 0000000000000000325869
plane 2 : 0000000000000000326415 0000000000000000325890
plane 3 : 0000000000000000217610 0000000000000000217413
plane 4 : 0000000000000000000000 0000000000000000000000
plane 5 : 0000000000000000217611 0000000000000000217433
plane 6 : 0000000000000000326417 0000000000000000325996
plane 7 : 0000000000000000326417 0000000000000000325996
plane 8 : 0000000000000000000000 0000000000000000000000
Ingress cells to destination slot
----------------------------------------------------------------
Log: no State: active, standby Privilege: ANYUSER