Specifications

5-223
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspbucketcstat
dspbucketcstat
Display Bucket Connection Statistics—AXSM
Use the dspbucketcstat command to display the connection statistics for the specified connection.
Note The dspbucketcstat command is an engineering command that is available only when the card is in
engineering mode. To enable engineering mode on the current card, enter the seteng on command.
Syntax
dspbucketcstat <ifNo> <vpi> <vci>
Syntax Description
Related Commands
clrbucketcstat
Attributes
Example
Display the connection statistics for Port 11, VPI 50, VCI 50.
D3.12.AXSM.a > dspbucketcstat 11 50 50
Ingress:
Clp0 Cells :40
Clp1 cells :0
Discarded CLP0 cells :0
Total discarded cells :0
Total Non compliant cells :0
EFCI cells :0
EOF cells :0
Egress:
Clp0 Cells :40
Clp1 cells :0
EFCI cells :0
EOF cells :0
D3.12.AXSM.a >
ifNo The logical interface (port) number, in the range from 1 through 64.
vpi The VPI in the range 1–4095.
vci The VCI in the range 1–65535.
Log: no State: active Privilege: ANYUSER