Specifications

5-221
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspbert
dspbert
Display Bit Error Rate Test—AXSM-E, AXSM-32-T1E1-E
Displays the status, configuration, and data for the current Bit Error Rate Test (BERT). Only one BERT
session can run on a particular bay at a time.
This command displays the following information:
• The user Id of the person who started the BERT session
• Start date and time
• Current date and time
• Physical slot number running BERT
• Line number
• Port number, if applicable (Port is an optional parameter for configuring a BERT session.)
• DS0 speed
• Type of test
The screen layout includes the following information:
• One or more rows for the results of the BERT: bit count, bit error count, bit error rate, and so on.
• Whether and how many times errors were injected.
Syntax
dspbert <bay.line>
Syntax Description
Related Commands
dspbertstats
Attributes
Example
MGX8850.11.AXSME.a > dspbert 1.1
Line : 1.1
BERT Admin Status : Up
Operational Status : OutOfSync
BERT Pattern : AllOnes
Error Insertion Rate: OneInHundred
Tx Pattern Invert : NotInverted
Rx Pattern Invert : NotInverted
Start Date : Sep 05 2002 21:28:31
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
Log: no State: active Privilege: ANYUSER