Specifications

5-220
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspbecnt
dspbecnt
Display Bit Error Count—AXSM, AXSM-XG
The dspbecnt command lets you display the APS-related bit error counters. The syntax for the AXSM
and PXM card types is slightly different. See the Syntax section for each type.
Syntax
dspbecnt <working-bay.line>
Syntax Description
Related Commands
addapsln, clrbecnt, cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, dspapsbkplane
Attributes
Example
MGX8850.5.AXSME.a > dspbecnt 1.3
Working Section 1 4.1.3 :
24 Hour Bit Error Count 0
15 Minute Bit Error Count 130
15 Second Bit Error Count 0
Working Section 2 5.1.3 :
24 Hour Bit Error Count 0
15 Minute Bit Error Count 30413
15 Second Bit Error Count 2307
working-bay.line Identifies the bay (1 or 2) and the line number. The line number is
from 1 to the highest numbered line on the back card.
Log: no State: active Privilege: ANYUSER