Specifications

5-217
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspatmlayercnt
dspatmlayercnt
Display ATM Layer Counters—AXSM-XG
Displays the ATM cell layer interval counters on the specified path (path_num).
Syntax
dspatmlayercnt <path_num> <intvl>
Syntax Description
Related Commands
cnfatmlayer
Attributes
Example
MGX8950.3.AXSMXG.a > dspatmlayercnt 1.1.1 1
Path : 1.1.1
Interval : 1
Ingress Egress
CLP0 Cells : 0 0
CLP1 Cells : 0 0
Valid OAM Cells : 0 0
Err OAM Cells : 0 0
Rcv Valid RM Cells : 0 0
Invalid VPI/VCI/PTI Cells : 0
Rcv Idle Cells : 0
Non-zero GFC Cells : 0
Last Unknown VPI : 0
Last Unknown VCI : 0
Discard HecErr Cells : 0
Corrected HecErr Cells : 0
path_num Identifies the path whose ATM cell layer interval counters you want to display.
Note If you do not know the path_num, enter the dsppaths command to see a list
of all path numbers on the current card.
intvl The time interval to display (0–96). 0 is the current 15-minute and 24-hour interval. 1
is the most recent 15-minute interval. 2 is the next most recent 15-minute interval,
and so on. 96 being the oldest 15-minute interval.
Log: no State: active, standby, init Privilege: ANYUSER