Specifications

5-212
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspatlasdiagstatcnf
dspatlasdiagstatcnf
Display Atlas Diagnostics Statistics Configuration—AXSM
Use the dspatlasdiagstatcnf command to display the current Atlas diagnostics statistics configuration
for the specified line.
Note The dspatlasdiagstatcnf command is an engineering command that is available only when the card is
in engineering mode. To enable engineering mode on the current card, enter the seteng on command.
Syntax
dspatlasdiagstatcnf <bay.line>
Syntax Description
Related Commands
cnfatlaslndiagstat, dspatlasdiagcnfcstat, dspaltlasdiagcstat, dspatlaslndiagstat
Attributes
Example
Display the current Atlas diagnostics statistics configuration for line 1 on the current AXSM back card
the top bay.
M8850_LA.1.AXSM.a > dspatlasdiagstatcnf 1.1
discard stats[0]:1
discard stats[1]:2
discard stats[2]:3
M8850_LA.1.AXSM.a >
bay.line The line number for which to display the frame receive diagnostics statistics.
Note Enter the dsplns command to display valid numbers for all lines configured on
the current AXSM.
Log: no State: active/ standby Privilege: SERVICE_GP