Specifications

5-211
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspatlasdiagcstat
dspatlasdiagcstat
Display Atlas Diagnostics Statistics—AXSM
Use the dspatlasdiagcstat command to display the Atlas diagnostics connection statistics for the
specified port.
Note The dspatlasdiagcstat command is an engineering command that is available only when the card is in
engineering mode. To enable engineering mode on the current card, enter the seteng on command.
Syntax
dspatlasdiagcstat <ifNum> <vpi> <vci>
Syntax Description
Related Commands
cnfatlaslndiagstat, dspatlasdiagcnfcstat, dspatlasdiagstatcnf, dspatlaslndiagstat
Attributes
Example
Display the Atlas connection statistics for Port 11, vpi 100, VCI 100.
M8850_LA.1.AXSM.a > dspatlasdiagcstat 21 100 100
ifNum The logical interface (port) number, in the range from 1 through 60.
vpi The VPI in the range 1–4095.
vci The VCI in the range 1–65535.
Log: no State: active/ standby Privilege: SERVICE_GP