Specifications

5-209
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspatlasdiagcnfcstat
dspatlasdiagcnfcstat
Display Atlas Diagnostics Configuration Statistics—AXSM
Use the dspatlasdiagcnfcstat command to display the Atlas diagnostics configuration connection
statistics for the specified port.
Note The dspatlasdiagcnfcstat command is an engineering command that is available only when the card is
in engineering mode. To enable engineering mode on the current card, enter the seteng on command.
Syntax
dspatlasdiagcnfcstat <ifNum>
Syntax Description
Related Commands
cnfatlaslndiagstat, dspatlasdiagcstat, dspatlasdiagstatcnf, dspatlaslndiagstat
Attributes
Example
Display the Atlas diagnostics configuration connection statistics for port 11.
M8850_LA.1.AXSM.a > dspatlasdiagcnfcstat 11
Ingress Cell Counting Configuration 1
Cells with PTI=111(F5 only) and VCI=7 to 15 (F4 only):CLP0 stream
RM cells : CLP0 stream
OAM cells: CLP0 stream
User Cells: CLP0 stream
Ingress Cell Counting Configuration 2
Cells with PTI=111(F5 only) and VCI=7 to 15 (F4 only):CLP1 stream
RM cells : CLP1 stream
OAM cells: CLP1 stream
User cells: CLP1 stream
Egress Cell Counting Configuration 1
Cells with PTI=111(F5 only) and VCI=7 to 15 (F4 only):CLP0 stream
RM cells : CLP0 stream
OAM cells: CLP0 stream
User Cells: CLP0 stream
Egress Cell Counting Configuration 2
Cells with PTI=111(F5 only) and VCI=7 to 15 (F4 only):CLP1 stream
RM cells : CLP1 stream
OAM cells: CLP1 stream
User cells: CLP1 stream
Non compliant Cell Counting Configuration 1
ifNum The logical interface (port) number, in the range from 1 through 60.
Log: no State: active/ standby Privilege: SERVICE_GP