Specifications

5-207
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspapsln
APS Trouble Mask : None
Bit Map Req Field Chan Field
Transmit K1 0x0 No Request Null Channel
Receive K1 0x0 No Request Null Channel
Current Request 0x0 No Request Null Channel
Bit Map Chan Field Arch Field Dir Mode Field
Transmit K2 0x10 Working Sec 1 1+1 Undefined
Receive K2 0x4 Null Channel 1+1 UNI
Working Sec 1 State : OK Working Sec 2 State : SF-L
Protocol : ITU
Top Bay : ENGAGED
Display the APS configuration for the AXSM-E in slot 6.
MGX8850.4.AXSME.a > dspapsln 4.1.2
Working Section 1 : 4.1.2 Working Section 2 : 5.1.2
Provisioned Arch : 1+1AnxB Provisioned Direction : bi
Operational Arch : 1+1AnxB Operational Direction : bi
Active Line : Working Sec 2 WTR(min) : 5
Primary Section : Working Sec 2 Secondary Section : Working Sec 1
SFBer 10^-n : 3 SDBer 10^-n : 5
Revertive : No Last User Switch Req : Clear
Bridge State : Set Selector State : Working Sec 2
Working Sec 1 State : OK Working Sec 2 State : OK
Protocol : ITU
Alarms : Clear
Bit Map Req/Chan/Mode
External reqField 0x0 NoRequest
External chanField 0x0 Null Channel
Internal reqField 0x0 NoRequest
Internal chanField 0x0 Null Channel
Transmit K1 reqField 0x0 NoRequest
Transmit K1 chanField 0x0 Null Channel
Receive K1 reqField 0x0 NoRequest
Receive K1 chanField 0x0 Null Channel
Transmit K2 chanField 0x2 Working Section 2
Transmit K2 modeField 0x0 Undefined
Receive K2 chanField 0x2 Working Section 2
Receive K2 modeField 0x0 Undefined
Note The dspapsln command output is identical on AXSM-E and AXSM-XG card.