Specifications

5-205
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspapsbkplane
dspapsbkplane
Display APS Backplane—AXSM, AXSM-E, AXSM-XG
Displays whether or not the APS mini-backplane is properly seated with the back cards.
When successful, this command displays:
BackPlane:ENGAGED
When not successful, this command displays:
BackPlane:NOT ENGAGED
See the addapsln command for an explanation of Automatic Protection Switching (APS).
Refer to the Cisco MGX 8800/8900 Hardware Installation Guide, Releases 2 - 5.2 for information on
installing the APS assembly to the backplane.
Syntax
dspapsbkplane
Syntax Description
No parameters
Related Commands
addapsln, cnfapsln, delapsln, dspapsln, dspapslns, switchapsln, clrbecnt, dspbecnt
Attributes
Example
Example of executing dspapsbkplane when an APS assembly is successfully installed to the backplane.
MGX8850.1.AXSM.a > dspapsbkplane
Line-ID Primary Card Signal Status Secondary Card Signal Status
Slot #1 Slot #2
1.1 PRESENT PRESENT
1.2 PRESENT ABSENT
2.1 PRESENT ABSENT
2.2 PRESENT ABSENT
Remote Front Card : PRESENT
Top Back Card : ENGAGED
Bottom Back Card : NOT-ENGAGED
Example of executing dspapsbkplane when an APS assembly is not successfully installed to the
backplane.
MGX8850.5.AXSME.a > dspapsbkplane
Top Bay: APS Back Plane Not Engaged or Adjacent Back Card Not Present.
Log: no State: active, standby Privilege: ANYUSER