Specifications

5-197
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspalm
dspalm
Display Alarm—AXSM, AXSM-E, AXSM-32-T1E1-E
Use the dspalm command to view the alarms associated with a specified line. See cnfalm for a
description of the types of alarms you can see. In addition to the configurable alarm types, the output
also shows instances of loss of cell delineation (LOCD).
Syntax
dspalm <-ds3 | -e3 | -sonet | -e1> <bay.Line>
Syntax Description
Related Commands
cnfalm, clralm, dspalms, dspalmcnt
Attributes
bay.line Identifies the bay (1 or 2) and the line number. The line number is
from 1 to the highest numbered line on the back card. Ranges:
For OC12: 1
For OC3: 1–4
For T3 and E3: 1–8
Log: no State: active, standby Privilege: ANYUSER