Specifications

5-194
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dspadjlnalm
dspadjlnalm
Display Adjacent Line Alarms—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The dspadjlnalm command lets you display the alarm status line for the adjacent back card. To acquire
the status, enter the bay and line number for the active back card.
Note The clradjlnalmcnt command works for only inter-card APS.
Syntax
dspadjlnalm <bay.line>
Syntax Description
Related Commands
dspadjlnalmcnt, clradjlnalmcnt
Attributes
Example
MGX8850.3.AXSME.a > dspadjlnalm 1.1
Line Number : 1.1
Section Alarm State : LOS
Line Alarm State : Clear
Path Alarm State : Clear
Section Stat Alarm State: CurrentESs,CurrentSESs,CurrentSEFSs
Line Stat Alarm State : CurrentSESs,CurrentUASs
Path Stat Alarm State : CurrentSESs,CurrentUASs
LOCD Alarm State : Clear
APS Alarm State : Major
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
Log: no State: active, standby Privilege: ANYUSER