Specifications

5-190
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dnln
dnln
Down Line—AXSM, AXSM-E, AXSM-XG, AXSM-32-T1E1-E
De-activate a line on the current card. Refer to the other dnln description if necessary.) Before you can
de-activate a line using dnln, you must take the following steps:
Step 1 Remove connections. Use delcon or delcons.
Step 2 Remove any resource partitions. Use dsprscprtn to see existing partitions and delrscprtn to remove
partitions.
Step 3 Remove all logical ports. Use dspports to see existing logical ports on the line and delport to remove
logical ports.
Syntax (AXSM, AXSM-E, AXSM-XG)
dnln <bay.line>
Syntax Description (AXSM, AXSM-E, AXSM-XG)
Related Commands
dspln, dsplns, cnfln, upln
Attributes (AXSM, AXSM-E, AXSM-XG)
Example (
AXSM, AXSM-E, AXSM-XG)
De-activate line 1 in bay 1.
MGX8850.1.AXSM.a > dnln 1.1
Syntax (AXSM-32-T1E1-E)
dnln <bay.line>
Syntax Description (AXSM-32-T1E1-E)
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.
Log: yes State: active Privilege: GROUP1
bay.line Identifies the bay (1 or 2) and the line number. The line number is from 1 to the
highest numbered line on the back card.