Specifications

Contents
iv
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
List of Commands by Function 1-7
CHAPTER 2 Preparing AXSM Lines for Communication 2-1
Preparing for Provisioning 2-1
Quickstart Provisioning Procedures 2-2
Preparing Cards and Lines for Configuration Quickstart 2-3
Channelizing SONET Lines Configuration Quickstart 2-4
Channelizing SDH Lines Configuration Quickstart 2-5
General AXSM Provisioning Procedures 2-6
Selecting and Viewing Service Class Templates 2-6
Overview of Service Class Templates 2-6
AXSM Service Class Templates 2-7
Setting Up Lines 2-9
Bringing Up Lines 2-10
Configuring Lines 2-12
Verifying Line Configuration 2-14
Establishing Redundancy between Two Lines with APS 2-14
Adding Intracard APS Lines 2-15
Adding Intercard APS Lines 2-16
Channelizing SONET, SDH, and DS3 (T3) Lines into Paths 2-17
Overview of Channelization on an AXSM-XG Card 2-17
Channelizing a Line 2-18
Channelization in SDH Networks Versus SONET Networks 2-20
Channelizing a SONET Line 2-21
Bringing Up and Configuring SONET Paths 2-22
Channelizing an SDH Line 2-23
Bringing Up and Configuring SDH Paths 2-25
CHAPTER 3 Provisioning ATM Services 3-1
Quickstart Provisioning Procedures 3-3
MPLS and PNNI Trunk Configuration Quickstart 3-3
MPLS and PNNI UNI Port Configuration Quickstart 3-5
SVC Configuration Quickstart 3-7
SPVC and SPVP Configuration Quickstart 3-8
PNNI Virtual Trunk Configuration Quickstart 3-9
XPVC and XPVP Configuration Quickstart 3-13
Cisco IGX Feeder to Cisco MGX 8850 Configuration Quickstart 3-14
PXM1 Feeder Configuration Quickstart 3-16
Cisco BPX PNNI Trunk Configuration Quickstart 3-18