Specifications

5-185
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dnilmi
dnilmi
Down ILMI—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The dnilmi command lets you de-activate (down) ILMI on a logical port so you can modify a
configuration, troubleshoot, or run certain commands that require ILMI to be inoperative.
Syntax
dnilmi <ifNum> <partId>
Syntax Description
Related Commands
dspilmi, dspilmis, upilmi
Attributes
Example
U4.13.AXSM.a > dspilmi 11 1
Configuration :
------------- :
Port : 11 SigVpi : 0
Partition : 1 SigVci : 16
IfIndex : 17635339 S:Keepalive Intvl : 1
SessionId : 1 T:conPoll Intvl : 5
Ilmi Trap : enable K:conPoll InactvFactor : 4
Agent : enable EnFromCtrlr : enable
Poll : enable ModLocalAttr : enable
AddrReg : enable ServReg : disable
AutoCnfg : enable
ILMI Protocol :
---------------
State : Verifying
Last Event : Get Response, Connectivity Verified
IME Type : network side
IF Type : Private UNI
ifNum The ranges for logical interface (or AXSM port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
partId The ranges for partition identifier are as follows:
• AXSM: 1–5
• AXSM-E, AXSM-XG: 1–20
Log: yes State: active, standby Privilege: SERVICE_GP