Specifications

5-184
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dncons
dncons
Down Connection—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Administratively deactivates (or “downs”) a range of connections (vpi/vci) so that you can modify or
troubleshoot the network. This operation applies to only SPVCs. To reactivate the connections, use
upcon.
Syntax
dncons <ifNum> <vpi> <vci> [-num <num. conns to del>] [-verbose < 1 | 0 >]
Syntax Description
Related Commands
upcon
Attributes
Example
MGX8850.2.AXSM.a > dncons 1 4095 65535 -num 2 0
ifNum Logical interface (or port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi For a UNI, the range is 0–255. For an NNI, the range is 0–4095.
vci For a VCC, the range is 1–65535. For a VPC, the only value is 0.
-num (Optional) Keyword that specifies the number of connections to take down.
-verbose (Optional) Keyword that enables (1) or disables (0) verbose mode. In verbose mode,
the screen displays the connection identifier of each connection immediately after it
is deleted.
Log: yes State: active Privilege: CISCO_GP