Specifications

5-177
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dellnloop
dellnloop
Delete Line Loop—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Remove the line loopback state from a line.
Syntax (AXSM)
dellnloop <-ds3 | -sonet> <bay.line>
Note For AXSM cards, the keyword ds3 applies to both T3 and E3 line types.
Syntax Description (AXSM)
Attributes (AXSM)
Syntax (AXSM-32-T1E1-E)
dellnloop -ds3<bay.line>
Syntax Description (AXSM-32-T1E1-E)
Attributes (AXSM-32-T1E1-E)
Related Commands
addlnloop
-ds3 | -sonet Specifies a SONET line (OC-3c, OC-12c, OC-48c) or a DS3 line (E3 or T3).
bay.line The bay (1 for upper or 2 for lower), and the line number. The line number
ranges from 1 to the highest number line on the back card.
Log: yes State: active Privilege: GROUP1
-ds3 The ds3 bay number (1–2) and line number (1–16). For example, for bay 1, line 16,
enter -ds3 1.16
Log: yes State: active, standby, init Privilege: GROUP1