Specifications

5-176
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
dellmi
dellmi
Delete Local Management Interface—AXSM, AXSM-XG
The dellmi command lets you delete LMI from an AXSM logical interface. By doing so, the feeder line
or connection to the SES is removed.
Note Remove all connections before you delete LMI on an interface.
Syntax
dellmi <ifNum>
Syntax Description
Related Command
addlmi, uplmi, dnlmi, uplmi, clrlmistat, dsplmi, dsplmis, dsplmistat
Attributes
Example
Delete the LMI on port 2, then check to see if any LMIs remain.
MGX8850.1.AXSM.a > dellmi 2
MGX8850.1.AXSM.a > dsplmis
IF Remote Remote Rmt Rmt LMI LMI LMI
No. Name IP Slot Port Admin Oper Alarms
--- ------- ------------ ----- ----- ----- ---- ------
MGX8850.1.AXSM.a >
ifNum The logical interface number has a range of 1–60.
Log: yes State: active Privilege: GROUP1