Specifications

5-172
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
delcons
delcons
Delete Connections—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
The delcons command deletes an entire range of connections on the specified port (ifNum). The privilege
level of this command is CISCO_GP. This command is intended for use by Cisco Development
Engineers only.
Caution The delcons command is for use by Cisco Development Engineers during system software testing. The
delcons command should not be used on production networks that are carrying live traffic. The delcons
command may delete more than the anticipated number of connections, and repairing the damage may
be very costly.
Syntax
delcons <ifNum> <vpi> <vci> [-num <num. conns to del>] [-verbose < 1 | 0 >]
Syntax Description
Related Commands
None
Attributes
Example
M8950_DC.5.AXSM.a > delcons
ERR: permission denied
Access restricted to engineering user only
ifNum Logical interface (or port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi For a UNI, the range is 0–255. For an NNI, the range is 0–4095.
vci For a VCC, the range is 1–65535. For a VPC, the only value is 0.
-num (Optional) Keyword that specifies the number of connections to delete.
-verbose (Optional) Keyword that enables (1) or disables (0) verbose mode. In verbose mode,
the screen displays the connection identifier of each connection immediately after it
is deleted.
Log: no State: active Privilege: CISCO_GP