Specifications

5-171
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
delcon
delcon
Delete Connection—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Deletes an SPVC or SPVP:
• For dual-ended connections, delete the connection at both ends—at the master end first.
• To delete a single-ended connection, use this command at the master end only.
• To delete a point-to-multipoint (P2MP) connection, all parties must be deleted from the connection
before you can delete the connection (see the delparty description). For a P2MP connection, use
this command at the master end only
Syntax
delcon <ifnum> <vpi> <vci>
Syntax Description
Related Commands
dspcon, addcon, cnfcon
Attributes
Example
MGX8850.1.3.AXSME.a > delcon 1 10 40
Deletion successful
ifnum Logical interface (or port) number. The ranges are:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range
is 1–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
Log: yes State: active Privilege: GROUP1