Specifications

5-167
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
core
OFF 00001 not used (can't be turned ON)
ON 00002 DRAM Parity Error
ON 00004 WatchDog Timeout Reset
ON 00008 Resource Overflow
OFF 00010 Clear All Configuration (can't be turned ON)
ON 00020 Missing Task
ON 00040 Reset because of PXM Low Voltage
ON 00080 Reset By Event Log Task
OFF 00100 Reset from Shell
ON 00200 Unknown
OFF 00400 Reset from PXM
OFF 00800 Reset System (can't be turned ON)
OFF 01000 Switch Core Card
ON 02000 Secondary Cache Error
ON 04000 Software Error Reset
OFF 08000 S/W reset due to upgrade (can't be turned ON)
OFF 10000 Restore All Configuration (can't be turned ON)
ON 20000 Device Driver Error
Set the core mask to 0xc and note the result in the display.
M8850_LA.1.AXSM.s > core mask c
Automatic core dumping is enabled for this slot.
The current core mask is 0xc.
OFF 00001 not used (can't be turned ON)
OFF 00002 DRAM Parity Error
ON 00004 WatchDog Timeout Reset
ON 00008 Resource Overflow
OFF 00010 Clear All Configuration (can't be turned ON)
OFF 00020 Missing Task
OFF 00040 Reset because of PXM Low Voltage
OFF 00080 Reset By Event Log Task
OFF 00100 Reset from Shell
OFF 00200 Unknown
OFF 00400 Reset from PXM
OFF 00800 Reset System (can't be turned ON)
OFF 01000 Switch Core Card
OFF 02000 Secondary Cache Error
OFF 04000 Software Error Reset
OFF 08000 S/W reset due to upgrade (can't be turned ON)
OFF 10000 Restore All Configuration (can't be turned ON)
OFF 20000 Device Driver Error
Determine if core dump is enabled for the current slot.
M8850_NY.1.AXSM.s > core
Automatic core dumping is enabled for this slot.
Saved core images are on PXM's hard disk (C:/).
M8850_NY.1.AXSM.s >