Specifications

5-159
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
cnfrscprtn
Related Commands
addrscprtn, delrscprtn, dsprscprtns, dsprscprtn
Attributes
Example
Configure the following:
• The logical port (ifNum) is 11.
• The partition number is 1.
• The ingress and egress each have a minimum of 1000 and a maximum of 10000.
• VPI range is 100-200.
• VCI range is 35-65535.
• Minimum guaranteed number of connections is 1.
• Maximum number of connections is 10.
M8850_LA.1.AXSM.a > cnfrscprtn -if 11 -id 1 -emin 1000 -emax 10000 -imin 1000 -imax 10000
-vpmin 100 -vpmax 200 -mincon 1 -maxcon 10
-vpmin Specifies the minimum VPI. For NNI, the range is 0–4095. For UNI, the range is
0–255.
Note The -vpmin can only be modified when the port is in the ‘Down’ state.
-vpmax Specifies the maximum VPI in the range 0–4095 for an NNI. For a UNI, the range is
0–255. The maxvpi cannot be less than the minvpi.
Note The -vpmax can only be modified when the port is in the ‘Down’ state.
-vcmin Minimum VCI range: 0–2000 (OC-48 only) or 1–65535
Note The -vcmin can only be modified when the port is in the ‘Down’ state.
-vcmax Maximum VCI: range: 0–2000 (OC-48 only) or 1–65535
Note The -vcmax can only be modified when the port is in the ‘Down’ state.
-mincon Specifies the guaranteed number of connections. The range is between 0 and the
maximum number of connections in the port group. See dspcd for information about
port groups.
Note On UNI ports, 1% of the <minConns> value is reserved for signaling.
-maxcon Specifies the maximum number of connections. The range is between 10 and the
maximum number of connections in the port group. See dspcd port group
information. maxConns cannot be less than minConns.
Log: yes State: active Privilege: GROUP1