Specifications

5-157
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
cnfrmrsrc
cnfrmrsrc
Configure Resource Monitor Resource—AXSM, AXSM-E, AXSM-XG
Configures the resource monitor polling interval and thresholds for a specific resource (rsrcId).
Syntax
cnfrmrsrc <rsrcId> [-poll] [-loth] [-medth] [-hith]
Syntax Description
Related Commands
dsprmrsrcs, dsprmrsrc, dsprmalms
Attributes
Example
cnfrmrsrc 3 -poll 30 -loth 1800 -medth 1950 -hith 2100
rsrcId The resource ID number that specifies the OS resource to configure. Use the
dsprmrsrcs command to get resource ID numbers. Range 0–16.
-poll The polling interval in seconds. Range: 5–86400 seconds (24 hours).
-loth The low threshold in percentage. Range: zero to any percentage less than the medium
threshold.
-medth The medium threshold in percentage. Range: any percentage greater than the low
threshold and less than the high threshold.
-hith The high threshold in percentage. Range: any percentage greater than the medium
threshold and up to 100%.
Log: no State: active, standby
Privilege: CISCO_GP