Specifications

5-154
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
cnfportdbgcnt
cnfportdbgcnt
Configure Port Debug Counters—AXSM
Configure port debugging counters on the current AXSM.
Syntax
cnfportdbg <ifNum> <configFlag>
Syntax Description
Related Commands
clrportdbg, dspportdbgcnt
Attributes
Example
Enable port debugging on logical interface (or port) 11, and then enter the dspportdbgcnt command to
display the port debugging counters for logical interface 11.
M8850_NY.1.AXSM.a > cnfportdbg 11 1
M8850_NY.1.AXSM.a > dspportdbgcnt 11
Ingress Egress
Arrival cells cnt[1]: 0 27187
Threshold dscd cnt[1]: 0 0
Programmed dscd cnt[1]: 0 0
Departure cells cnt[1]: 0 27350
Arrival cells cnt[2]: 0 0
Threshold dscd cnt[2]: 0 0
Programmed dscd cnt[2]: 0 0
Departure cells cnt[2]: 0 0
Arrival cells cnt[3]: 0 0
Threshold dscd cnt[3]: 0 0
Programmed dscd cnt[3]: 0 0
Departure cells cnt[3]: 0 0
Arrival cells cnt[4]: 0 0
Threshold dscd cnt[4]: 0 0
Programmed dscd cnt[4]: 0 0
Departure cells cnt[4]: 0 0
Arrival cells cnt[5]: 0 0
Type <CR> to continue, Q<CR> to stop:
ifNum Logical interface (or port) number. The range is from 0 through 60.
configFlag Enables/disables port debugging on the specified port. Enter 1 to enable port debugging,
or 0 to disable port debugging.
Log: yes State: active, standby Privilege: SERVICE_GP