Specifications

5-153
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
cnfportdbg
cnfportdbg
Configure Port Debugging—AXSM
Use the cnfportdbg command to enable or disable the debugging feature on the specified port.
Syntax
cnfportdbg <portNum> <configFlag>
Syntax Description
Related Commands
clrportdbgcnt, dspportdbgcnf,dspportdbgcnt
Attributes
Example
Enable the debugging feature on port 11.
M8850_LA.1.AXSM.a > cnfportdbg 11 1
M8850_LA.1.AXSM.a >
portNum Port number, in the range from 1 through 60.
configFlag Enables or disables the port debugging feature. Enter 1 to enable port
debugging, or enter 2 to disable port debugging.
Log: yes State: active, standby Privilege: SERVICE_GP