Specifications

5-152
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5
cnfport
Related Commands
addport, delport, dspport, dspports
Attributes
Example
For logical port 1, configure a guaranteed minimum of 10000 cps and a maximum rate of 20000 cps.
MGX8850.7.AXSME.a > cnfport -if 1 -min 10000 max 20000
-max Specifies the maximum rate on a logical port in cells per second (cps).
• OC3: 50–353207 cps
• T3: 50–96000 (PLCP) or 104268 (ADM) cps
• E3: 50–80000 cps
• T1: 50–3622 cps
• E1: 50–4528 cps
-sct Specifies the number of a service class template (SCT) for the port. The range is 0–255.
Cisco provides SCT numbers 2, 3, 4, and 5. You can modify one of these SCTs through the
Cisco WAN Manager application and assign a number in the range 6–255 to the new SCT.
Subsequently, you can assign the new SCT to the port with the sctID parameter in cnfport.
To see the ID of the current SCT for this port, use dspport. To see the parameters within
the current SCT, use the dspportsct command.
Log: yes State: active Privilege: GROUP1