Specifications

5-136
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnflmitrace
cnflmitrace
Configure Local Management Interface Trace—AXSM, AXSM-E, AXSM-32-T1E1-E, AXSM-XG
Use the cnflmitrace command to configure the Local Management Interface (LMI) trace feature on the
specified logical trunks.
Syntax
cnflmitrace <BufWrap> <TrcEnable> <FuncCode> <Ltrk> <Dir>
Syntax Description
Related Commands
clrlmitrace, cnflmitrace, dsplmitrace
Attributes
Example
Enable the LMI buffer wrap around and trace feature for both directions.
MGX8850.1.AXSM.a > cnflmitrace Yes Yes 0x1A,0x1E 0 *
BufWrap Enables or disables buffer wrap around on the trace. Enter yes to enable
buffer wrap around, or no to disable buffer wrap around.
TrcEnable Enables or disables the trace feature. Enter yes to enable the trace feature,
or no to disable the trace feature.
FuncCode String of function codes in HEX separated by comma.
Ltrk String of trunk numbers in HEX separated by comma.
Dir The direction to be traced. Enter T to trace indicate the transmit direction,
or R to indicate the receive direction. Enter * if you want the trace to be
performed in both the transmit and receive directions.
Log: yes State: active, standby Privilege: CISCO_GP