Specifications
5-129
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfcon
Example
Enable OAM CC in the connection with a VPI and VCI of 10 40 on interface 1.
MGX8850.1.11.AXSM.a > cnfcon 1 10 40 -cc 1
Configuration successful
Assign a routing priority of 3 to the connection with a VPI and VCI of 102 and 102, respectively, on
interface number 1. Check the result by using the dspcon command first on the AXSM then on the PXM.
MGX8850.3.AXSM.a > cnfcon 1 102 102 -rtngprio 3
Configuration successful
MGX8850.3.AXSM.a > dspcon 1 102 102
--------------------------------------------------------------------------
Local : NSAP Address vpi vci
(M) 4700918100000100001A531C2A00000103180100 102 102
Remote : NSAP Address vpi vci
(S) 4700918100000200036B5E30CD00000101180200 102 102
--------------------------------------------------------------------------
Conn. Type : VCC Admn Status : ADMN-UP
Service Type : cbr1 Oper Status : FAIL
Controller : 2 Record # : 0
SlavePersist : YES
--------------------------------------------------------------------------
Local PCR : 50 Remote PCR : 50
Local SCR : N/A Remote SCR : N/A
Local CDV : -1 Remote CDV : -1
Local CTD : -1 Remote CTD : -1
Local MBS : N/A Remote MBS : N/A
Max Cost : -1 Frame discard: DISABLED
Local CDVT : 250000 OAM segment : ENABLED
Local PercentUtil: 100 Remote PercentUtil: 100
Priority : 3
MGX8850.8.PXM.a > dspcon 3:1.1:1 102 102
Port Vpi Vci Owner State Persistency
----------------------------------------------------------------------------
Local 3:1.1:1 102.102 MASTER FAIL Persistent
Address: 47.00918100000100001a531c2a.000001031801.00
Node name: MGX8850
Remote Routed 102.102 SLAVE -- Persistent
Address: 47.00918100000200036b5e30cd.000001011802.00
Node name:
-------------------- Provisioning Parameters --------------------
Connection Type: VCC Cast Type: Point-to-Point
Service Category: CBR Conformance: CBR.1
Bearer Class: BCOB-X
Last Fail Cause: unallocated (unassigned) number Attempts: 20055
Continuity Check: Disabled Frame Discard: Disabled
L-Utils: 100 R-Utils: 100 Max Cost: -1 Routing Cost: 0
OAM Segment Ep: Enabled
Priority: 3