Specifications

5-128
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfcon
Related Commands
addcon, delcon, dspcon, dspcons, dspconstats
Attributes
-prefrte This option modifies the preferred route association to the connection. Use this optional
parameter at the master endpoint only. See the addpref description for details about the
preferred route feature.
To disassociate a connection from a route, type a 0 for this parameter.
Note An SPVC can be associated with one preferred route. For an XPVC, you can
associate the preferred route with only the SPVC portion of the XPVC.
Range: 0–65535
Default: 0
-directrte This parameter specifies whether the connection can take only the preferred route
associated through the -prefrte parameter. Use this optional parameter at the master
endpoint only. To remove the directed route requirement from the connection, specify a
0 for this parameter. The possible values are as follows:
• 1: yes (make the preferred route required)
• 0: no (do not require the connection to take the preferred route)
Default: no (0)
Log: yes State: active Privilege: GROUP1