Specifications

5-125
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfcon
Syntax Description
ifNum Logical interface (or port) number. The ranges are as follows:
• AXSM: 1–60
• AXSM-E: 1–32
• AXSM-XG: 1–126
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is
1–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
-lpcr Specifies the peak cell rate (PCR) from the local endpoint to the remote endpoint. PCR
is the maximum cell rate for the connection at any time. The range is 7–5651328 cells
per second.
Note For the cnfcon command, the switch uses lpcr and rpcr at the master endpoint
only. If you specify lpcr and rpcr at the slave endpoint, they are ignored.
-rpcr Specifies the peak cell rate (PCR) from the remote endpoint to the local endpoint. PCR
is the maximum cell rate for the connection at any time. The range is 7–5651328 cells
per second.
Note For the cnfcon command, the switch uses lpcr and rpcr at the master endpoint
only. If you specify lpcr and rpcr at the slave endpoint, they are ignored.
-lscr Specifies the sustained cell rate (SCR) from the local endpoint to the remote endpoint.
SCR is the maximum cell rate that a connection can sustain for long time periods. The
range is 7–5651328 cells per second.
-rscr Specifies the sustained cell rate (SCR) from the remote endpoint to the local endpoint.
SCR is the maximum cell rate that a connection can sustain for long time periods. The
range is 7–5651328 cells per second.
-lmbs Specifies the maximum burst size (MBS) from the local endpoint to the the remote
endpoint. MBS is the maximum number of cells that can burst at the PCR and still be
compliant. The range is 1–5000000 cells
-rmbs Specifies the maximum burst size (MBS) from the remote endpoint to the local endpoint.
MBS is the maximum number of cells that can burst at the PCR and still be compliant.
The range is 1–5000000 cells.
-cdvt Specifies the cell delay variation tolerance (CDVT) from the local endpoint to the remote
endpoint. CDVT controls the time scale over which the PCR is policed. The range is
1–5000000 microseconds.
Note No remote CDVT is necessary.
-lcdv Specifies the peak to peak cell delay variation (CDV) from the local endpoint to the
remote endpoint. The range is 1–16777215 microseconds.
To revert to the default value, enter a –1.
-lctd Specifies the cell transfer delay (CTD) from the local endpoint to the remote endpoint.
The range is 0–65535 microseconds.
To revert to the default value, enter a –1.