Specifications

5-119
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfchandbg
cnfchandbg
Configure Channelized Debugging —AXSM
Enables channelized debugging for the specified channel on the current AXSM.
Syntax
cnfchandbg <ifNum> <vpi> <vci> <dbgLevel>
Syntax Description
Related Commands
clrchandbg, dspchandbgcnf, dspchandbgcnt
Attributes
Example
Enable level 1 (core) channelized debugging on logical interface (or port) 11, vpi 0, vci 0. Enter the
dspchandbgcnt command to display the channel counters for logical interface (or port) 11, vpi 0, vci 0.
M8850_NY.1.AXSM.a > cnfchandbg 11 0 0 1
M8850_NY.1.AXSM.a > dspchandbgcnt 11 0 0
Ingress Egress
Instantaneous Qdepth: 0 0
Arr CLP0 EFCI0 cells: 233 233
Arr CLP0 EFCI1 cells: 0 0
Arr CLP1 EFCI0 cells: 0 0
Arr CLP1 EFCI1 cells: 0 0
Dep CLP0 EFCI0 cells: 233 233
Dep CLP0 EFCI1 cells: 0 0
Dep CLP1 EFCI0 cells: 0 0
Dep CLP1 EFCI1 cells: 0 0
ifNum Logical interface (or port) number. The range is from 0 through 60.
vpi Virtual path identifier in the range 0–255 (UNI) or 0–4095 (NNI or VNNI).
vci Virtual connection identifier (VCI):
• For a VCC on a UNI, the range is 1–4095. On an NNI or VNNI, the VCI range is
1–65535. For MPLS, the recommended minimum VCI is 35.
• For a VPC, the vci is 0.
dbgLevel Level of statistics debugging to be performed:
• 0 = disable
• 1 = coreStats
• 2 = detailedStats
Log: no State: active/standby Privilege: SERVICE_GP