Specifications

5-113
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 5 AXSM Command Reference
cnfcdsct
The following two types of tasks may be helpful before you assign SCTs:
• To see the actual values in an SCT, use dspportsct for a port SCT or dspcdsct for a card-level SCT.
• To see a list of SCT files on the disk, use cd to reach the SCT directory, then use ls to display the
contents of the AXSM directory. See the Example section for an illustration of this task.
You should use the provided SCTs or create new templates by using Cisco WAN Manager to modify the
provided SCTs and saving them with new IDs.
Until you specify an SCT, the AXSM has a default SCT of 0. The system uses SCT ID = 0 when:
• The AXSM is powered-up for the first time.
• The card’s database is rebuilt.
• The card is rebooted and the user-specified SCT file for a particular port is corrupt or missing. In
this situation, the default applies to only the affected port.
Syntax
cnfcdsct <SCT-id>
Syntax Description
Related Commands
dspcdsct, dspcd, dspsct
Attributes
Example
Configure SCT 5 for the card. If this configuration is the first time you are specifying a card-level SCT
on the switch, you might confirm the existence of the SCT files on disk.
MGX8850.7.PXM.a > pwd
C:
MGX8850.7.PXM.a > cd C:\SCT
MGX8850.7.PXM.a > ls AXSM
..
AXSM_SCT.CARD.2
AXSM_SCT.CARD.3
AXSM_SCT.CARD.4
AXSM_SCT.CARD.5
AXSM_SCT.PORT.2
AXSM_SCT.PORT.3
AXSM_SCT.PORT.4
AXSM_SCT.PORT.5
In the file system :
total space : 819200 K bytes
free space : 624494 K bytes
SCT-id Number of the SCT at the card-level. The range is 1–255.
Log: yes State: active Privilege: GROUP1